DR series 60w guide rail switching power supply

can be installed on DIN rail: TS-35/7.5or TS-35/15

Guide rail type switching power supply 60W

Features:                                                                                                                                      ·Universal AC input ·Small volume, low weight, high efficiency·Protections:short circuit/over load/over voltage·Cooling by free air convection·Can be installed on DIN rail: TS-35/7.5or TS-35/15·LED indicator for power on·100% full load burn-in test·2 Year warranty

DR-60W
Model		DR-60-5	DR-60-12	DR-60-24
Output	DC voltage	5V	12V	24V
	Voltage tolerance	±2%	±1%	±1%
	Rated current	6.5A	4.5A	2.5A
	Current range	0~6.5A	0~3.5A	0~2.5A
	Rated power	32.5W	54W	60W
	Ripple&noise	100mvp-p	100mvp-p	150mvp-p
	DCvoltage ADJ.range	-9%~+10%	±10%	±10%
Input	Voltage range	90~264VAC, 127~373VDC
	Frequency	47~63Hz
	AC current	1.2A/110VAC, 0.65A/220VAC
	Efficiency	76%	82%	84%
	Inrush current	cold start 25A/115VAC, 50A/230VAC
	Leakage current	< 1mA/240VAC
Protection	Over load	above 105%~150%  rated power
		protection type: hiccup mode,auto-recovery after fault condition is removed
	Over voltage	6.8~8.2V	15.6~17.8V	30.6~33.2V
		protection type:cut off output voltage,diode clamp
Environment	Working temp,humidity	-20°C~+60°C, 20%~90%RH
	Storagetemp,humidity	-40°C~+85°C, 10%~95%RH non-condensing
	Withstand vibration	10~500Hz,2G 10min/1cycle, period for 60 minutes, each axes
Safety	Withstand voltage	I/P-O/P:3KVAC  I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC
Fitstandard	Safety standard	Fit UL1012

DR series 60w guide rail switching power supply